Free Download hp LaserJet 3200 firmware update utility drivers for hp

1. The hp LaserJet Firmware Update Utility does not support Windows 95.
2. The Firmware Update Utility requires the hp LaserJet 3200 to be connected using a parallel port.
3. You will need 20MB of free disk space to use the Firmware Update Utility.
4. The hp LaserJet 3200 printer must be in a READY state and remain powered on during the entire firmware update process.
5. Administrator Privileges are required on the PC executing the utility.
6. The control panel of the printer will display Printing Document.
7. After the Firmware Update Utility has finished, the device will need to be turned off and then on.
8. If you are upgrading from version 20000807, the message Permanent Storage Initialization will be displayed on the control panel. A Permanent Storage Initialization will reset any user settings to their factory default. Any Speed dial numbers will also be lost.
9. For information on how to restore speed dials and other information, refer to http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&docname=bpl10017
10. To determine the version of firmware of your hp LaserJet 3200 printer, print a Configuration Page by pressing the Enter/Menu key, press the < > (arrow) key until Reports appears in the control panel, then press Enter/Menu and then the < > (arrow) key until Configuration Report is displayed. Press the Enter/Menu key to initiate the printing of the report.

Version 20020612

Note: A Firmware Datecode version of 20020531 on the Configuration Page is identical