Free Download Seagate 1000-GB Barracuda 7200.11 SATA Hard Drive Firmware Upgrade for Workstations drivers for hp

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve

This package provides a utility to upgrade the firmware on certain serial ATA (SATA) hard drives (HDDs) for the supported workstation models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue.The utility included in this package upgrades the firmware on the following Seagate 7200 rpm SATA Hard Drive that shipped on HP Workstations:Seagate Model Number: ST31000340ASHP Part Number: 464263-001Firmware Revision: HP12NOTE: The included utility checks to ensure that an affected hard drive model is installed before upgrading the firmware. If the correct hard drive model is not found, the firmware is not upgraded.The new firmware fixes a well-publicized issue that could render the drive inoperable after a power cycle. Although the combined probabilities of all the required conditions for a drive failure are very small, HP recommends that all appropriate hard drives be upgraded as a preventative measure. After the upgrade, the firmware revision will be HP13.The included utility creates a DOS bootable diskette (floppy), CD, or USB key that will contain all the files to update the identified hard drive. Alternatively, you can copy the update utility files to a bootable medium you already have. To create or modify the bootable medium, follow the instructions in the MAKEIT.TXT file, which is located at the top leve