Home> Download hp Drivers> Download sp40440.exe Drivers

Real Free Download HP sp40440.exe driver file

We Provide Real download link for sp40440.exe driver file, you can download official hp sp40440.exe drivers files free here, driver file size:4.7 MB, Just download sp40440.exe driver files for your hp device now!

sp40440.exe driver file free for hp

Driver File Name	sp40440.exe
Device Type	AMD Dual Core Processor Optimizer
media Type	Electronic
File Description	HOW TO USE: Download the SoftPaq .EXE file to a directory on your hard drive. Execute the downloaded file and follow the on-screen instructions. Place the firmware image file (cpqia401.bin) on an FTP, HTTP, or TFTP server that is network-accessible from the Integrated Administrator to be updated. Using Telnet, SecureSH, or a serial terminal, login as the Administrator on the Integrated Administrator to be updated. At the ''>'' prompt, type the following command: UPDATE IMAGE < url >. Where < url > can be either of the following items: http://host/path ftp://host/path ftp://username:password@host/path tftp://host/path NOTE: In the previously listed items, ''host'' is a fully qualified domain name or IP address, and ''path'' is the pathname of the flash image to download, usually cpqia401.bin.CAUTION: Do not Power Off or reset the enclosure during Step 6. Type ''yes'' to confirm the flash update operation. The Integrated Administrator prompts all users to log off, waits one minute, and then downloads the image file, verifies the image file, and finally re-programs the flash memory. If the flash programming process is successful, the Integrated Administrator automatically restarts (reboots). NOTE: The Integrated Administrator firmware update process (including a restart) does not affect the operation of any blades that may be running within the enclosure. If upgrading from Version 1.11 or earlier, the Integrated Administrator (after restarting) temporarily loses access to blade information (such as blade name, MAC addresses, processor, memory, and so forth) until the next time each blade is rebooted.NOTE: For additional information, see the user guide for the Integrated Administrator, which may found on http://www.hp.com/support and search for PC BL Enclosure.
Release Date	Jan 28, 2009
Update Date	Jan 12, 2011
Version	1.1.3 Rev. A
OS:	Windows Vista (32-bit) etc..
Download	Download Free Now

HOW TO USE:

Download the SoftPaq .EXE file to a directory on your hard drive.
Execute the downloaded file and follow the on-screen instructions.
Place the firmware image file (cpqia401.bin) on an FTP, HTTP, or TFTP server that is network-accessible from the Integrated Administrator to be updated.
Using Telnet, SecureSH, or a serial terminal, login as the Administrator on the Integrated Administrator to be updated.
At the ''>'' prompt, type the following command: UPDATE IMAGE < url >.
- Where < url > can be either of the following items:
  - http://host/path ftp://host/path
  - ftp://username:password@host/path
  - tftp://host/path
NOTE: In the previously listed items, ''host'' is a fully qualified domain name or IP address, and ''path'' is the pathname of the flash image to download, usually cpqia401.bin.CAUTION: Do not Power Off or reset the enclosure during Step 6.
Type ''yes'' to confirm the flash update operation. The Integrated Administrator p
- Adds support for updated HP PC BL Enclosure and new HP PC BL Switch.
This sp40440.exe driver file fit for these kinds of hp product:

HP HP BladeSystem bc2000 Blade PC Driver | HP HP BladeSystem bc2200 Blade PC Driver | HP HP BladeSystem bc2500 Blade PC Driver | HP HP BladeSystem bc2800 Blade PC Driver |