Home> Download HP Drivers> Download Hitachi Deskstar SATA Hard Drive Firmware for Workstations Drivers
Free Download Hitachi Deskstar SATA Hard Drive Firmware for Workstations drivers for hp
We Provide Real free download link of hp Hitachi Deskstar SATA Hard Drive Firmware for Workstations drivers, you can download official hp Hitachi Deskstar SATA Hard Drive Firmware for Workstations drivers free here, driver file size:, Just update Hitachi Deskstar SATA Hard Drive Firmware for Workstations driver for your hp device now!
HP Hitachi Deskstar SATA Hard Drive Firmware for Workstations Drivers free download
| File Detail | Description | File Name | Download |
|
Version: 100 Rev. A File Szie: Media Type:Reference OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
Download Free | |
|
Version: 1.00 Rev. A File Szie: 0.1 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
placeholder.txt | Download Free |
|
Version: Q824146 Rev. SP1a File Szie: 0.1 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
placeholder.txt | Download Free |
|
Version: 7244 Rev. A File Szie: 1.8 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp27081.exe | Download Free |
|
Version: 6.5.342 Rev. A File Szie: 0.9 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp29869.exe | Download Free |
|
Version: Q885270 Rev. A File Szie: 4.3 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp30459.exe | Download Free |
|
Version: 1.0 Rev. A File Szie: 0.4 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp30687.exe | Download Free |
|
Version: 8.133.1.1 Rev. A File Szie: 39.1 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp30796.exe | Download Free |
|
Version: 77.56 Rev. A File Szie: 43.1 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp31103.exe | Download Free |
|
Version: 328269 Rev. SP1a File Szie: 5.1 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp28209.exe | Download Free |
|
Version: 2.00 Rev. D File Szie: 3.1 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp32605.exe | Download Free |
|
Version: 113-4570x-104 Rev. A File Szie: 6.9 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp33230.exe | Download Free |
|
Version: 8208 Rev. A File Szie: 1.4 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp33596.exe | Download Free |
|
Version: 2.0 Rev. A File Szie: 1.0 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp34615.exe | Download Free |
|
Version: 1.0 Rev. A File Szie: 41.2 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp34679.exe | Download Free |
|
Version: 3.00,B,3 Rev. B File Szie: 10.4 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp34821.exe | Download Free |
|
Version: 5.0-03.00.1135.01 Rev. D File Szie: 84.6 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp34827.exe | Download Free |
|
Version: 4.1.4 Rev. A File Szie: 199.1 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp35267.exe | Download Free |
|
Version: 5.44.02.68.06 Rev. A File Szie: 3.4 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp36304.exe | Download Free |
|
Version: 5.71.22.57.05 Rev. A File Szie: 4.7 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp36321.exe | Download Free |
|
Version: 1.0 Rev. A File Szie: 52.5 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp36412.exe | Download Free |
|
Version: 162.52 Rev. A File Szie: 67.3 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp36824.exe | Download Free |
|
Version: 8.391.2.1.1.1 Rev. A File Szie: 42.9 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp37705.exe | Download Free |
|
Version: 60.84.6A.00.10 Rev. A File Szie: 5.0 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp38507.exe | Download Free |
|
Version: 60.84.6A.00.12 Rev. A File Szie: 4.7 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp38509.exe | Download Free |
|
Version: C902 Rev. A.01 File Szie: 0.6 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp39716.exe | Download Free |
|
Version: 1.25.03 Rev. D File Szie: 2.4 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp41484.exe | Download Free |
|
Version: 178.46 Rev. A File Szie: 97.5 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp41937.exe | Download Free |
|
Version: 62.92.6F.00.08 Rev. A File Szie: 4.7 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp42949.exe | Download Free |
|
Version: 9.1 Rev. A File Szie: 21.1 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp43003.exe | Download Free |
|
Version: 178.46 Rev. A File Szie: 80.9 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp41938.exe | Download Free |
|
Version: 113-B10107-113 Rev. A File Szie: 4.8 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp43720.exe | Download Free |
|
Version: 3.04.07 Rev. A File Szie: 35.9 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp45664.exe | Download Free |
|
Version: 62.92.7A.00.0A Rev. A File Szie: 5.3 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp45901.exe | Download Free |
|
Version: 60.84.6A.00.11 Rev. A File Szie: 5.3 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp45934.exe | Download Free |
|
Version: 62.00.77.00.04 Rev. A File Szie: 5.4 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp46690.exe | Download Free |
|
Version: V05 Rev. A File Szie: 6.7 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp46812.exe | Download Free |
|
Version: 1.0 Rev. A5TE File Szie: 1.3 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp49496.exe | Download Free |
|
Version: 62.98.75.00.08 Rev. A File Szie: 5.0 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp50205.exe | Download Free |
|
Version: 70.00.2B.00.0E Rev. A File Szie: 5.0 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp50207.exe | Download Free |
|
Version: HP26 Rev. B File Szie: 2.6 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp52107.exe | Download Free |
|
Version: 10.0.16.13299 Rev. A File Szie: 39.3 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp53063.exe | Download Free |
|
Version: 10.0.16.13299 Rev. A File Szie: 148.6 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp55511.exe | Download Free |
|
Version: 1.00 Rev. B File Szie: 11.6 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp56357.exe | Download Free |
|
Version: 1.0 Rev. B File Szie: 0.7 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp56815.exe | Download Free |
|
Version: 62.94.6E.00.25 Rev. A File Szie: 5.4 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp56918.exe | Download Free |
|
Version: 62.94.90.00.0D Rev. A File Szie: 5.4 MB Media Type:Electronic OS:32 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp56919.exe | Download Free |
|
Version: 70.06.3F.00.04 Rev. A File Szie: 6.8 MB Media Type:Electronic OS:not set |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp57154.exe | Download Free |
|
Version: A Rev. 1.01 File Szie: 525.8 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp58946.exe | Download Free |
|
Version: A Rev. 1.01 File Szie: 502.4 MB Media Type:Electronic OS:64 |
(SATA) hard drives (HDDs) for the supported system models and operating systems. The firmware upgrade provides a preventative firmware fix for a known issue. IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a preventative measure. The utility included in this package upgrades the firmware on the following Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations: HDP725016GLA380 (160 GB) HDP725025GLA380 (250 GB) HDP725032GLA380 (320 GB) HDP725050GLA360 (500 GB) NOTE: The included utility checks to ensure that an affected hard drive model is installed. This utility only upgrades the firmware on affected hard drives. If no affected hard drive model is found, the firmware is not upgraded. After the upgrade, the new firmware revisions will be: "GMBOA5TE" for the 160-GB drive "GM2OA5TE" for the 250-GB drive "GM3OA5TE" for the 320-GB drive "GM4OA5TE" for the 500-GB drive The included utility provides a ISO file, that must be burned to a CD. The CD must then be used to boot the workstation. The CD contains all the files to automatically upgrade the identified hard drive firmware. NOTE: To boot your workstation from the CD, restart your workstation and press F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press Enter. Follow the on-screen instructions. IMPORTANT: This firmware update does not correct pre-existing conditions, it is a preventative improvement only. Therefore, it is strongly recommended that a self-test be run on each hard drive prior to the update. While the SATA controller is in a non-RAID mode, the "DPS Self-test" option is available in the Storage |
sp58949.exe | Download Free |