Home> Download hp Drivers> Download sp58946.exe Drivers

Real Free Download HP sp58946.exe driver file

We Provide Real download link for sp58946.exe driver file, you can download official hp sp58946.exe drivers files free here, driver file size:525.8 MB, Just download sp58946.exe driver files for your hp device now!


sp58946.exe driver file free for hp

Driver File Name sp58946.exe
Device Type Hitachi Deskstar SATA Hard Drive Firmware for Workstations
media Type Electronic
File Description This package provides a utility to upgrade the firmware on certain Serial ATA
(SATA) hard drives (HDDs) for the supported system models and operating
systems. The firmware upgrade provides a preventative firmware fix for a known
issue.

IMPORTANT: HP recommends that all appropriate hard drives be upgraded as a
preventative measure.

The utility included in this package upgrades the firmware on the following
Hitachi Deskstar 7200 rpm SATA Hard Drives that shipped on HP Workstations:

HDP725016GLA380 (160 GB)
HDP725025GLA380 (250 GB)
HDP725032GLA380 (320 GB)
HDP725050GLA360 (500 GB)

NOTE: The included utility checks to ensure that an affected hard drive model
is installed. This utility only upgrades the firmware on affected hard drives.
If no affected hard drive model is found, the firmware is not upgraded.

After the upgrade, the new firmware revisions will be:
"GMBOA5TE" for the 160-GB drive
"GM2OA5TE" for the 250-GB drive
"GM3OA5TE" for the 320-GB drive
"GM4OA5TE" for the 500-GB drive

The included utility provides a ISO file, that must be burned to a CD. The CD
must then be used to boot the workstation. The CD contains all the files to
automatically upgrade the identified hard drive firmware.

NOTE: To boot your workstation from the CD, restart your workstation and press
F9 to enter the Boot Menu, then select CD-ROM from the Boot Menu and press
Enter. Follow the on-screen instructions.

IMPORTANT: This firmware update does not correct pre-existing conditions, it is
a preventative improvement only. Therefore, it is strongly recommended that a
self-test be run on each hard drive prior to the update. While the SATA
controller is in a non-RAID mode, the "DPS Self-test" option is available in
the Storage
Release Date Oct 08, 2012
Update Date Mar 05, 2016
Version A Rev. 1.01
OS: Windows XP (64-bit) etc..
Download Download Free Now

To create a bootable HP USB Flash Disk that can be used for the LSI SAS 9212-4i Firmware Utility, complete the following steps:

1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:SWSETUPSP60767).

3. Open a Command window (Go to Start->Run...->CMD).

4. Change to the directory where the package was extracted. For example:
cd c:swsetupSP60767

5. Insert a USB key and note the drive letter that Microsoft Windows assigns to it.

WARNING: Step 6 will overwrite any existing data on the specified drive letter.

6. Create the bootable key with &q
- Provides an updated firmware release from LSI.

This sp58946.exe driver file fit for these kinds of hp product: